DPC front Monitor Temperature Control Device
| Product Description | DPC front Monitor Temperature Control Device |
| Product Type | 17-8821-7783/34204200 |
| Brand | Bartec |
- Dual display (setpoint/actual value display)
- Wide-range voltage input
- Sensor monitoring
- Programmable with CodeKey
- Can be used in conjunction with Pt 100 Ex, for temperature regulation in explosion-protected heating circuits
Description
The DPC front Monitor temperature control device is designed as a control device with special functions: heating current monitoring, external setpoint switching and communication through RS 485. It works in the factory setting as a PID control device with a logic output and a relay output.
As an alternative, the same device can also be used as a ON/OFF control device. The device is used to regulate a logic output for solid state relays. The relay output is used for alarm signalling. In addition a digital input can be used to choose between different setpoints. The functions high and low alarm, sensor monitoring, heating circuit monitoring and heating current monitoring offer additional safety for temperature regulation.
When using the device with the factory setting, a simple setup is used for putting into operation for the first time. For example the setpoint, analog output limits, heating currents, low alarm, and if desired, the high alarm must be set.
Technical Data
| Protection Class | IP 54 or IP 65 with installation sealing |
| Dimensions | 48 mm x 48 mm x 108 mm (lenght x width x depth) |
| Material | Enclosure: Plastic UL 94 V0 |
| Installation | Front panel (Cut-out 45.5 mm x 45.5 mm) |
| Storage temperature | -10 °C to +60 °C |
| Weight | 0.2 kg |
| Temperature range | depending on the sensor version |
| Voltage | AC 100 V to AC 240 V ± 10% 50/60 Hz |
| Electrical life | >105 switching cycles (relay output) |
| Connection | Terminal screws 2 x 1,5 mm² |
| Operating temperature range | 0 °C up to +50 °C |
| Datasheet |  |
- General Info
-
Description
The DPC front Monitor temperature control device is designed as a control device with special functions: heating current monitoring, external setpoint switching and communication through RS 485. It works in the factory setting as a PID control device with a logic output and a relay output.
As an alternative, the same device can also be used as a ON/OFF control device. The device is used to regulate a logic output for solid state relays. The relay output is used for alarm signalling. In addition a digital input can be used to choose between different setpoints. The functions high and low alarm, sensor monitoring, heating circuit monitoring and heating current monitoring offer additional safety for temperature regulation.
When using the device with the factory setting, a simple setup is used for putting into operation for the first time. For example the setpoint, analog output limits, heating currents, low alarm, and if desired, the high alarm must be set. - Technical Data
-
Technical Data
Protection Class IP 54 or IP 65 with installation sealing Dimensions 48 mm x 48 mm x 108 mm (lenght x width x depth) Material Enclosure: Plastic UL 94 V0 Installation Front panel (Cut-out 45.5 mm x 45.5 mm) Storage temperature -10 °C to +60 °C Weight 0.2 kg Temperature range depending on the sensor version Voltage AC 100 V to AC 240 V ± 10% 50/60 Hz Electrical life >105 switching cycles (relay output) Connection Terminal screws 2 x 1,5 mm² Operating temperature range 0 °C up to +50 °C - Download
-
Datasheet