Anti-condensation Motor Heater MSH
| Product Description | Anti-condensation Motor Heater MSH |
| Product Type | 27-1811-…. |
| Brand | Bartec |
- Easy to connect thanks to its parallel structure
- High watts density power output
- Extremely flexible in a temperature range -50°C up to +180°C with high di-electric strength
Description
This highly flexible heating cable is used as an anti-condensation heater for electric motors and generators. The device offers added protection against corrosion damage that usually results in machine breakdowns by effectively preventing the formation of condensation water even under extreme climatic conditions.
Special versions on request:
differing supply voltage
differing heating cables
special heating cable length
Function
The heating cables are integrated directly into the windings, i.e. built around the winding armature. Heat transfer is improved dramatically since the windings during the impregnation process.
Structure
MSH ant-condensation heaters are pre-wired, ready-to-use parallel heating cables with cold lead ends. Consisting of two parallel flexible copper leads with silicone glass-fibre insulation, the heating element of CuNi or NiCr alloy is wound around the cable. The 0.37 m long cold lead ends of FEP insulated stranded copper flex terminate the heating cable. The outer jacket consists of glass-fibre, covered with silicone rubber. Both ends of the heating cable are sealed with silicone rubber.
Technical Data
| Dimensions | see data sheet Bending radius: ≥ 25 mm |
| Material | Heating elements: CuNi or NiCr Insulation: alkali-free glass-fibre with silicone rubber |
| Heat output | 12.5 W, 25 W, 50 W, 75 W or 100 W Watts density 50 W/m at nominal voltage |
| Voltage | standard 230 V (special 110 V, others on request) Permissible excess voltage: 1.2 x nominal voltage Test voltage: 2000 V to earth |
| Connection | 2 x FEP-insulated stranded, copper flex, 0.5 mm² with crimped sleeve |
| Ambient temperature | Temperature range: -50 °C up to +180 °C |
| Datasheet |  |
- General Info
-
Description
This highly flexible heating cable is used as an anti-condensation heater for electric motors and generators. The device offers added protection against corrosion damage that usually results in machine breakdowns by effectively preventing the formation of condensation water even under extreme climatic conditions.
Special versions on request:
differing supply voltage
differing heating cables
special heating cable lengthFunction
The heating cables are integrated directly into the windings, i.e. built around the winding armature. Heat transfer is improved dramatically since the windings during the impregnation process.
Structure
MSH ant-condensation heaters are pre-wired, ready-to-use parallel heating cables with cold lead ends. Consisting of two parallel flexible copper leads with silicone glass-fibre insulation, the heating element of CuNi or NiCr alloy is wound around the cable. The 0.37 m long cold lead ends of FEP insulated stranded copper flex terminate the heating cable. The outer jacket consists of glass-fibre, covered with silicone rubber. Both ends of the heating cable are sealed with silicone rubber.
- Technical Data
-
Technical Data
Dimensions see data sheet
Bending radius: ≥ 25 mmMaterial Heating elements: CuNi or NiCr
Insulation: alkali-free glass-fibre with silicone rubberHeat output 12.5 W, 25 W, 50 W, 75 W or 100 W
Watts density 50 W/m at nominal voltageVoltage standard 230 V (special 110 V, others on request)
Permissible excess voltage: 1.2 x nominal voltage
Test voltage: 2000 V to earthConnection 2 x FEP-insulated stranded, copper flex, 0.5 mm² with crimped sleeve Ambient temperature Temperature range: -50 °C up to +180 °C - Download
-
Datasheet