Position switch Aluminium
Product Description | Position switch Aluminium |
Product Type | 07-2911-…./.. |
Brand | Bartec |
- Dimensions and mounting dimensions according to DIN EN 50041
- Compatible with non-Ex DIN limit switches
- Different switching elements
Description
All dimensions and actuating elements of the Ex d position switch correspond to the DIN EN 50041 standard.
Its 30 x 60 mm mounting dimensions make the switch directly compatible to the position switch corresponding to the same DIN standard. The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection cable Type 07-2511 is mounted as switching element.
Different actuators are available for the variety of actuating possibilities. After the removal of four screws these knobs can be rotated by 90 °C allowing so four different directions of actuation. Gold-plated or gold-nickel contacts are available for the switching of low currents of voltages.
Standard length of the connection cables are 3 m. BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the position switch within the Ex area.
Technical Data
Protection Class | IP 66 (IEC 60529) |
Dimentions | see data sheet |
Material | Enclosure material: aluminium |
Mechanical Life | max. 10^6 switching cycles depending on plunger operating speed and angle |
Voltage | see data sheet |
Current | see data sheet |
Connection | Lead 0.75 mm2 HO5VV-F/A05VV-F/BETAflam® other cores and leads on request |
Ambient temperature | T6 to max. +75 °C depending on the rated current Operating temperature: -50 °C to +100 °C depending on the model and the materials used |
Explosion Protection
Marking | ATEX: Ex II 2G Ex db IIC T6, T5 Gb Ex II 2D Ex tb IIIC T80°C, T95°C Db IECEx: Ex db IIC T6, T5 Gb Ex tb IIIC T80°C, T95°C Db |
Certification | EPS 14 ATEX 1 766 X IECEx EPS 14.0092X NEPSI GYJ17.1068X |
- General Info
-
Description
All dimensions and actuating elements of the Ex d position switch correspond to the DIN EN 50041 standard.
Its 30 x 60 mm mounting dimensions make the switch directly compatible to the position switch corresponding to the same DIN standard. The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection cable Type 07-2511 is mounted as switching element.
Different actuators are available for the variety of actuating possibilities. After the removal of four screws these knobs can be rotated by 90 °C allowing so four different directions of actuation. Gold-plated or gold-nickel contacts are available for the switching of low currents of voltages.
Standard length of the connection cables are 3 m. BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the position switch within the Ex area. - Technical Data
-
Technical Data
Protection Class IP 66 (IEC 60529) Dimentions see data sheet Material Enclosure material: aluminium Mechanical Life max. 10^6 switching cycles depending on plunger operating speed and angle Voltage see data sheet Current see data sheet Connection Lead 0.75 mm2 HO5VV-F/A05VV-F/BETAflam®
other cores and leads on requestAmbient temperature T6 to max. +75 °C
depending on the rated current
Operating temperature: -50 °C to +100 °C
depending on the model and the materials used - Explosion Protection
-
Explosion Protection
Marking ATEX:
Ex II 2G Ex db IIC T6, T5 Gb
Ex II 2D Ex tb IIIC T80°C, T95°C Db
IECEx:
Ex db IIC T6, T5 Gb
Ex tb IIIC T80°C, T95°C DbCertification EPS 14 ATEX 1 766 X
IECEx EPS 14.0092X
NEPSI GYJ17.1068X - Download