Position switch Aluminium

null
Product Description Position switch Aluminium
Product Type 07-2911-…./..
Brand Bartec
  • Dimensions and mounting dimensions according to DIN EN 50041
  • Compatible with non-Ex DIN limit switches
  • Different switching elements

Description

All dimensions and actuating elements of the Ex d position switch correspond to the DIN EN 50041 standard.
Its 30 x 60 mm mounting dimensions make the switch directly compatible to the position switch corresponding to the same DIN standard. The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection cable Type 07-2511 is mounted as switching element.
Different actuators are available for the variety of actuating possibilities. After the removal of four screws these knobs can be rotated by 90 °C allowing so four different directions of actuation. Gold-plated or gold-nickel contacts are available for the switching of low currents of voltages.
Standard length of the connection cables are 3 m. BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the position switch within the Ex area.

Technical Data

Protection Class IP 66 (IEC 60529)
Dimentions see data sheet
Material Enclosure material: aluminium
Mechanical Life max. 10^6 switching cycles depending on plunger operating speed and angle
Voltage see data sheet
Current see data sheet
Connection Lead 0.75 mm2 HO5VV-F/A05VV-F/BETAflam®
other cores and leads on request
Ambient temperature T6 to max. +75 °C
depending on the rated current
Operating temperature: -50 °C to +100 °C
depending on the model and the materials used

Explosion Protection

Marking ATEX:
Ex II 2G Ex db IIC T6, T5 Gb
Ex II 2D Ex tb IIIC T80°C, T95°C Db
IECEx:
Ex db IIC T6, T5 Gb
Ex tb IIIC T80°C, T95°C Db
Certification EPS 14 ATEX 1 766 X
IECEx EPS 14.0092X
NEPSI GYJ17.1068X
Datasheet
Operation instructions
Declaration of Conformity
General Info

Description

All dimensions and actuating elements of the Ex d position switch correspond to the DIN EN 50041 standard.
Its 30 x 60 mm mounting dimensions make the switch directly compatible to the position switch corresponding to the same DIN standard. The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection cable Type 07-2511 is mounted as switching element.
Different actuators are available for the variety of actuating possibilities. After the removal of four screws these knobs can be rotated by 90 °C allowing so four different directions of actuation. Gold-plated or gold-nickel contacts are available for the switching of low currents of voltages.
Standard length of the connection cables are 3 m. BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the position switch within the Ex area.

Technical Data

Technical Data

Protection Class IP 66 (IEC 60529)
Dimentions see data sheet
Material Enclosure material: aluminium
Mechanical Life max. 10^6 switching cycles depending on plunger operating speed and angle
Voltage see data sheet
Current see data sheet
Connection Lead 0.75 mm2 HO5VV-F/A05VV-F/BETAflam®
other cores and leads on request
Ambient temperature T6 to max. +75 °C
depending on the rated current
Operating temperature: -50 °C to +100 °C
depending on the model and the materials used
Explosion Protection

Explosion Protection

Marking ATEX:
Ex II 2G Ex db IIC T6, T5 Gb
Ex II 2D Ex tb IIIC T80°C, T95°C Db
IECEx:
Ex db IIC T6, T5 Gb
Ex tb IIIC T80°C, T95°C Db
Certification EPS 14 ATEX 1 766 X
IECEx EPS 14.0092X
NEPSI GYJ17.1068X
Download
Datasheet
Operation instructions
Declaration of Conformity