PSB Connection System TWISTO-B
Product Description | PSB Connection System TWISTO-B |
Product Type | 27-56K.-…. |
Brand | Bartec |
- Cost savings because the assembly time is reduced
- Great reliability of assembly because the work steps are few and simple
Description
Simpler and safer to use, yet at the same time faster and thus cheaper, is how the major benefits of the TWISTO-B can be described. This method of connection is for use with BARTEC PSB heating tapes of series 07-5801-2…. All that is needed to assemble a heating circuit is a knife and diagonal cutter.
This dispenses with the time-consuming work of exposing the two conductors, the laborious splicing and twisting of the protective braiding and then connecting to a terminal. Just a piece of the outer protective jacket is removed, a clamping sheet is fitted over a part of the exposed braiding, the remaining part is pulled back over the clamping sheet.
The heating tape is then inserted into the clamp cutting fixture and by twisting together the two outer sleeves (one sleeve comes ready prepared with a 2 m long supply cable), the heating tape is contacted in the clamp cutting fixture. The end terminal consists of just one part, whereby the end of the heating tape is shortened and inserted into the terminal piece.
Technical Data
Protection class | IP 66 |
Dimentions | Connection/union Diameter 33 x 125 (135) mm long End terminal 23 x 20 x 37.5 mm long |
Voltage | AC 250 V |
Current | 16 A |
Ambient temperature | -20 °C to +85 °C |
Certification | VDE 40036171 DNV GL TAE000032D TC RU C-DE.ML03.B.00062 |
- General Info
-
Description
Simpler and safer to use, yet at the same time faster and thus cheaper, is how the major benefits of the TWISTO-B can be described. This method of connection is for use with BARTEC PSB heating tapes of series 07-5801-2…. All that is needed to assemble a heating circuit is a knife and diagonal cutter.
This dispenses with the time-consuming work of exposing the two conductors, the laborious splicing and twisting of the protective braiding and then connecting to a terminal. Just a piece of the outer protective jacket is removed, a clamping sheet is fitted over a part of the exposed braiding, the remaining part is pulled back over the clamping sheet.
The heating tape is then inserted into the clamp cutting fixture and by twisting together the two outer sleeves (one sleeve comes ready prepared with a 2 m long supply cable), the heating tape is contacted in the clamp cutting fixture. The end terminal consists of just one part, whereby the end of the heating tape is shortened and inserted into the terminal piece. - Technical Data
-
Technical Data
Protection class IP 66 Dimentions Connection/union
Diameter 33 x 125 (135) mm long
End terminal 23 x 20 x 37.5 mm longVoltage AC 250 V Current 16 A Ambient temperature -20 °C to +85 °C Certification VDE 40036171
DNV GL TAE000032D
TC RU C-DE.ML03.B.00062 - Download