Self-limiting parallel heating tape HTSB
| Product Description | Self-limiting parallel heating tape HTSB |
| Product Type | 07-5819-…. |
| Brand | Bartec |
- Steam purging possible
- Wide operating temperature range
- Self-limiting
- Can be used in explosive atmospheres without temperature limiter
- Simple installation thanks to its high flexibility
- Outer protective fluoropolymer jacket ensures resistance to corrosion and chemical influences
Description
A temperature-dependent resistive element between the parallel copper conductors regulates and limits the power output of the heating tape. This output regulation is carried out automatically at every point of the heating tape depending on the prevailing ambient temperature. If the ambient temperature increases, the power output is reduced.
The parallel design allows the heating tape to be cut to any length. This simplifies planning and installation. The heating tape is cut directly on the construction
Technical Data
| Dimensions | with protective braid and protective outer jacket of fluoropolymer HTSB 15 to HTSB 60: 10.2 x 4.8 mm HTSB 75 and HTSB 90: 11.4 x 5.2 mm Min. bending radius: 25 mm |
| Material | Flexible wire: HTSB 15 up to HTSB 90: 1.1 mm² |
| Heat output | 15 W/m, 30 W/m, 45 W/m, 60 W/m, 75 W/m, 90 W/m (at +10 °C) |
| Voltage | AC 208 V up to 277 V |
| Resistance | Max. resistance of protective braid: < 18.2 Ω/km |
| Ambient temperature | Max. exposure temperature switched on: +250 °C switched off: +250 °C Min. installation temperature: -40 °C Min. start-up temperature: -40 °C |
Explosion Protection
| Marking | Ex II 2G Ex e IIC T2, T3 Gb Ex II 2D Ex t IIIC T200 °C, T300 °C IP 6x Db |
| Datasheet |  |
- General Info
-
Description
A temperature-dependent resistive element between the parallel copper conductors regulates and limits the power output of the heating tape. This output regulation is carried out automatically at every point of the heating tape depending on the prevailing ambient temperature. If the ambient temperature increases, the power output is reduced.
The parallel design allows the heating tape to be cut to any length. This simplifies planning and installation. The heating tape is cut directly on the construction - Technical Data
-
Technical Data
Dimensions with protective braid and protective outer jacket of fluoropolymer
HTSB 15 to HTSB 60: 10.2 x 4.8 mm
HTSB 75 and HTSB 90: 11.4 x 5.2 mm
Min. bending radius: 25 mmMaterial Flexible wire: HTSB 15 up to HTSB 90: 1.1 mm² Heat output 15 W/m, 30 W/m, 45 W/m, 60 W/m, 75 W/m, 90 W/m (at +10 °C) Voltage AC 208 V up to 277 V Resistance Max. resistance of protective braid: < 18.2 Ω/km Ambient temperature Max. exposure temperature
switched on: +250 °C
switched off: +250 °C
Min. installation temperature: -40 °C
Min. start-up temperature: -40 °C - Explosion Protection
-
Explosion Protection
Marking Ex II 2G Ex e IIC T2, T3 Gb
Ex II 2D Ex t IIIC T200 °C, T300 °C IP 6x Db - Download
-
Datasheet